Sunday, January 27, 2013

Pantry Details: No Sew Curtain, Tiered shelf, & Step Stool


I'm back with some DIY details from the pantry project!

But first, I wanted to share a little snippet of our last weekend. We took a road trip with some friends to Savannah for the 3-day weekend (our second time there, we went for our anniversary two years ago) and had so much fun. The best fried seafood and drinks (chocolate daiquiris from Wet Willy's... omg.) and entertainment and stores and architecture and history. Love this city. Next time we'll keep driving for a couple more hours and stop in Charleston—heard it was a must-see!

I booked a "haunted pub crawl" called Boos & Brews for Saturday night. We stopped at the local (haunted) bars and were guided around the streets and cemeteries with real ghost stories—for the record, I don't believe any of it but it's fun when you're drinking ;)

Here we are getting ready to leave the first pub!




Here's one of the old haunted houses:


For our last stop, we went to the Moon River Brewery (which has been on Ghost Hunter shows) and they took us up into the attic where the ghost/orb sightings are common...



I didn't capture anything on my camera, but for whatever reason the spirits were posing for Brad's. He caught "orbs" in a bunch of his photos... like this one:



And check it out... we zoomed into this photo and look what we found:


See the face? Just below the white spot? Looks like some old guy with a mustache looking straight at you. Creepy. (ok, not really, but it would be if it was real).

Anyway, enough with the ghost stories. Let's get to the pantry!




DIY Project #1: No Sew Curtains



As you may remember, I purchased 2.5 yards of this fabric on Etsy for $18.

I didn't bother trimming the width—it's a bit wider than the door opening but it really doesn't matter since it will probably always be pulled open.

The first step was just to hem all of the edges, using Stitch Witchery:



They have this stuff in pretty much any craft store, and different brands make it.

I had quite a bit leftover from old projects so I didn't need to purchase any (yet).

(sorry, bad iPhone photos ahead)


All you need is an ironing board, iron, damp rags and your stitch witchery. No photos of this part but you just lay a strip down, fold your fabric over, place a damp (thin) rag on top and hold your iron on the area for several seconds. I also use the steam setting to help keep it from sticking to the rag.



Once all the edges were hemmed, I measured the height I needed the  curtain to be and folded it over to hem a pocket for the rod.



Except I completely didn't think it through and made it just big enough for the rod to fit in...



Which was a huge problem because a) the ends of the rod didn't fit inside the fabric loop, b) it was so tight that the fabric wouldn't freely move to one end of the rod, c) I had already cut the excess fabric after this photo was taken, and d) I ran out of stitch witchery.

DANGIT.

I was too flustered to take photos of the damage at this point so I ripped the stitch witchery out and decided to run to Michaels' in the morning to buy some more and try to salvage this project.

So Sunday morning I started fresh, and ended up having to hem the piece I cut off back together to get my length back...



Then I hemmed a new rod pocket—this time leaving PLENTY of room.



Luckily, it worked.



For the rod, I just picked up a cheap $5 shower rod at Walmart. It holds up just fine.



The trim also covers most of it which is nice. It's not too noticeable. Especially if you're taller than 5'2".



And there it is, my first attempt at curtain making! I see more of this in my future.



DIY Project #2: Tiered can shelf



This project is more functional than anything, but I had to add the pop of yellow for the small glimpses of it between the cans, just for fun.

It started with materials I had lying around in the garage. We had some extra 2x4's leftover from a who knows what project, and I determined they were the perfect size for this pantry.


I searched the garage far and wide, and found that I literally had just enough wood on hand to do this. Actually, after measuring it, I realized the smallest piece of wood was about 0.5" too short, but I figured I'd just throw it in the back and you'd never see it (no, it wasn't worth driving to Lowe's to get a new one).

The first step was cutting them all to size.



Then I did a quick mockup/test fit:



Works for me.

To secure the pieces together, I had to do them one at a time. I drilled deep countersink holes so that the screws would be deep enough into both pieces to hold them together. I marked my depth with blue tape to know when to stop drilling. Here's a little visual to show the screw placement (imagine the screw going into another 2x4" on the left side)



Here's all of the countersink holes (placement doesn't matter at all, as long as they don't run into each other)



Securing the last screw in the bottom piece for the back row:



Once the rows were secured together, I needed a way to connect all three to each other. Technically, I could have left them separate but I didn't want to deal with things shifting around in there by accident.

Since I don't have a Kreg Jig (still, ugh), I just used what I had... a flat piece of spare wood I found in the garage.

After cutting it to size, I went to work with a nail gun.



Test fitting in the pantry:


Finally, I sanded the heck out of it and applied a few coats of Valspar's Hint of Honey (same color as the step stool):



I actually considered wrapping the boards in fabric, but realized it would pretty much be a waste since it's mostly hidden. But if you had a larger open pantry where it was more visible, that could turn out nice.

It's worth noting that these boards are in no way perfectly flat and straight. I think that's just the nature of 2x4's.





Luckily, it really doesn't matter because you can't tell when the cans are sitting on it.



Nothing beats a functional + free project!


DIY Project #3: Ana White's Painter's Ladder/Step Stool



When I decided to mount a medicine cabinet up under the ceiling, I knew that meant I had to bring in a stool. I had been looking for *ever* for the perfect stool for this pantry. I found one I loved at Ikea, but it was just so wide—not what I had in mind.

Then, while doing a Pinterest search, I found this:




SOLD! The dimensions were a perfect fit.

I was pleased to find it was a plan from Ana White, whose projects I've always loved and admired but had never felt confident enough to try on my own (nor had the tools for).

This one seemed like a good starter plan—just needed a miter saw and a drill. Check and check.

I should mention that these plans, though they look like a step stool, seemed to be designed for a table. I read through everyone else's comments and found that many people were in fact using them as a stool. To be safe, I purchased decent quality wood (no mdf) and good wood screws. The wood cost $18 and the screws were $12, but if I'm gonna be standing on this thing, it needs to be done right.

Back at home, I printed out the instructions and cut everything down to size.


I don't have exact step by step photos here because the plans do a good job of laying all out, but here's some shots from our process:



This was the top step of the ladder. We made the first piece, added some wood glue, and connected it to the top 3 boards:


Here I am, marking something... (I don't even remember anymore)



Attaching the legs to the base:



Leveling the bottom step before we secure it to the legs:



We put a few extra screws in, just in case. After the bottom step was secure and we made sure it was nice and steady, we crossed our fingers as Brad gave it the stress test:



And it didn't break! We figure if it can handle his weight, surely it would be safe with me (40lbs less), who will be the one using it. It can't be any less safe than particle board Ikea furniture thrown together with allen wrenches, right?

Next it was time for beautification.

First I lightly sanded all the edges and rough spots.



Then I used wood filler over all of the screws:






After drying for a few hours, I sanded those smooth:




(I ignored the screws underneath that you'd never see).

Next it was time for stain. I decided to stain before painting so that when I distressed it, the dark wood would show through.

I used my go-to stain, Minwax in Ebony (photo above). I focused on the edges of the wood since that was the only part that would show through.



....and then after taking this I realized I had forgot about a few screw holes. So I had to patch, wait, and sand again.


But eventually it was dried and ready to paint.



I wanted something soft and buttery without being too orange, too green, or too saturated. Valspar's Hint of Honey seemed to fit.

But let me tell you... I got the "base model" paint. It sucked.



The paint is so thin... I had to apply sooo many coats. Lesson learned.

Luckily, when you're going for the 'vintage' look, your paint job is supposed to be imperfect.

After drying, I went back and sanded around the corners/edges/etc to give it that worn in look.



Now I can step on it and drag it around and not even worry about messing it up. Do you see why I love shabby chic so much?! It's so easy. No stress. I wish shabby chic walls were a thing... I would never have to worry about touch ups. Sigh.





And that's the end of my Pantry Remodel! Did I cover everything? Still have questions? Check out Phase 1, Phase 2, Phase 3, and the Reveal. Or leave me a note in the comments and I'll get back to you :)

This project has inspired me to tackle something that's been neglected lately... our kitchen bar table and stools. Yep... I'm not quite done with the kitchen yet. The yellow step stool needs a yellow table friend. And maybe some new lighting. I just need to formulate my plan, and I'll report back as soon as something happens.

Until then....


9 comments:

  1. It looks so cheerful and happy! :)

    And that face in the orb is downright creepy.

    Jen

    ReplyDelete
  2. I live in Charleston and when you enter those old homes you can "feel" something in the air... so creepy!
    I love the pops of color you added with your pantry!

    ReplyDelete
  3. Love that yellow stool! I could totally use one in my closet in place of the ugly Rubbermaid plastic folding thing stuck in there now.

    My husband and I just LOVE Savannah! We actually spent our honeymoon there and then went back 2 years later with my sister and her boyfriend. We always say we're going to take a day and drive up to Charleston, but it hasn't happened yet- There's just too much to see and do in Savannah! Next time you go, check out the haunted house tour at the Sorrel-Weed House. The 1st time we went, it was just the two of us and one other couple (and the tour guide, of course)- super spooky! Also, drive over to Tybee Island and eat at McElwee's - standard coastal seafood fare, but it is amazing. I could go on for days about Savannah- if only I could convince my hubby to move 4 hours east ;)

    ReplyDelete
  4. I found your blog while googling tufted headboards last week and have been hooked ever since! I LOVE how you seem to run into all the same problems I do as a DIY entrepreneur. It's so refreshing. Thank you so much for sharing!

    ReplyDelete
  5. Loving all of the projects!!!
    And you must come to Charleston, it is beautiful and full of history...and i live there! :) ha.

    ReplyDelete
  6. I have a totally unrelated question. My husband & I are in the middle of completely renovating our kitchen which includes replacing the flooring of the living areas and kitchen....basically the entire house, minus the bedrooms/bathrooms. We are considering engineered birch but have heard that it's a softer wood. Have you had any issues with your birch floor?

    Thanks!
    Emily

    ReplyDelete
    Replies
    1. Well, we are pretty careful (don't normally wear shoes indoors, no kids or dogs, etc), but we're happy with it, especially for what we paid. It can get light surface scratches pretty easily, but luckily the distressing and hand scraping hides most of it. It doesn't seem any better or worse than the floors in our last house, which were engineered cherry wood. All in all I don't think you can beat it for the price.

      You can request a free sample from build direct (comes with a huge coupon) to test it out!

      Delete
  7. I love the curtains! Thanks for keeping us updated. I really appreciate the amount of work you put into this

    ReplyDelete
  8. The pantry looks amazing!! I love it!! And Savannah - oh man, I miss that place. Love the riverwalk. My favorite was always this one store that had every flavor of popcorn you could imagine. I'm hoping me and the hubs can make a trip back there soon.

    ReplyDelete